for newest assembly instructions and click the TAB titled Assembly.
Assembly instructions below are outdated:
For Assembling the Reach 3D Printer, Follow the instructions below.
IF YOU HAVE ANY QUESTIONS ABOUT THE BUILD OR SOFTWARE,
CONSULT OUR ONLINE FORUM AND ASK US!
Also check out our unfinished User MANUAL:
Our Printers are Packaged by Kits, for Ease of Assembly.
Lay Out all the Parts with room for the Build.
Have these tools Handy, There's only a few. Be sure to use the correct sized Drill Bits and Hex allen wrenches...
13/64" or 5mm
1/8" or 3mm
5/64" or 2mm
Some Hex drivers:
(use ALL metric, standards WILL strip)
A Precision Flat screwdriver
A Small Phillips screwdriver
A Large Phillips screwdriver
Needle Nose Pliers
Some sharp Scissors
A SHARP knife or x-Acto blade
And a Drill....